30 ton Props

Cassaform's 30t prop is a heavy duty structural propping and shoring system specifically suited to the building and civil infrastructure industries.

The 30t Prop is a modular system which provides a custom solution for almost any application on building sites. It is assembled using different components connected together to achieve the desired height or length required. Refer to the height/component chart below for details.

Super 30 HEIGHT/COMPONENT CHART
Prop Height Required (metres) Total Weight (kg) Super 30 Jack (400-610mm) Number / Size of Sections Required
125mm 250mm 500mm 1000mm 2000mm
25 kg 8 kg 11 kg 17 kg 30 kg 55 kg
0.400 - 0.610 25 1
0.525 - 0.735 33 1 1
0.650 - 0.860 33 1 1
0.775 - 0.985 44 1 1 1
0.900 - 1.110 42 1 1
1.025 - 1.235 50 1 1 1
1.150 - 1.360 53 1 1 1
1.275 - 1.485 61 1 1 1 1
1.400 - 1.610 55 1 1
1.525 - 1.735 63 1 1 1
1.650 - 1.860 66 1 1 1
1.775 - 1.985 74 1 1 1 1
1.900 - 2.110 72 1 1 1
2.025 - 2.235 80 1 1 1 1
2.150 - 2.360 83 1 1 1 1
2.275 - 2.485 91 1 1 1 1 1
2.400 - 2.610 80 1 1
2.525 - 2.735 88 1 1 1
2.650 - 2.860 91 1 1 1
2.775 - 2.985 99 1 1 1 1
2.900 - 3.110 97 1 1 1
3.025 - 3.235 105 1 1 1 1
3.150 - 3.360 108 1 1 1 1
3.275 - 3.485 116 1 1 1 1 1
3.400 - 3.610 110 1 1 1
3.525 - 3.735 118 1 1 1 1
3.650 - 3.860 121 1 1 1 1
3.775 - 3.985 129 1 1 1 1 1
3.900 - 4.110 127 1 1 1 1
4.025 - 4.235 135 1 1 1 1 1
4.150 - 4.360 138 1 1 1 1 1
4.275 - 4.485 146 1 1 1 1 1 1
4.400 - 4.610 135 1 2
4.550 - 4.760 143 1 1 2
4.650 - 4.860 146 1 1 2
4.775 - 4.985 154 1 1 1 2
4.900 - 5.110 152 1 1 2
5.025 - 5.235 160 1 1 1 2
5.150 - 5.360 163 1 1 1 2
5.275 - 5.485 171 1 1 1 1 2
5.400 - 5.610 165 1 1 2
5.524 - 5.735 173 1 1 1 2
5.775 - 5.985 184 1 1 1 1 2
5.900 - 6.110 182 1 1 1 2
6.025 - 6.235 190 1 1 1 1 2
6.150 - 6.350 193 1 1 1 1 2
6.275 - 6.485 201 1 1 1 1 1 2
6.400 - 6.610 190 1 3
6.525 - 6.735 198 1 1 3
6.650 - 6.860 201 1 1 3
6.775 - 6.985 209 1 1 1 3
6.900 - 7.110 207 1 1 3
7.025 - 7.235 215 1 1 1 3
7.150 - 7.360 218 1 1 1 3
7.275 - 7.485 226 1 1 1 1 3
7.400 - 7.610 220 1 1 3
7.525 - 7.735 228 1 1 1 3
7.650 - 7.860 231 1 1 1 3
7.775 - 7.985 239 1 1 1 1 3
7.900 - 8.110 237 1 1 1 3
8.025 - 8.235 245 1 1 1 1 3
8.150 - 8.360 248 1 1 1 1 3
8.275 - 8485 256 1 1 1 1 1 3
8.525 - 8.735 253 1 1 4
8.650 - 8.860 256 1 1 4
8.775 - 8.985 264 1 1 1 4
8.900 - 9.110 262 1 1 4
9.025 - 9.235 270 1 1 1 4

Despite it's high load-bearing capacities it is so versatile that it can be easily assembled in difficult access locations. This flexibility is achieved with the use of standard componentry and accessories which includes:

  • Standard Section - 2000mm, 1000mm, 500mm, 250mm and 125mm
  • Screw Jacks
  • Racking Heads
  • Needle beam fixing clamps
  • Transfer fixing plates

All these components have been manufactured and sized to allow manual handling where necessary and can be assembled into a wide variety of towers and truss designs to suit almost any application.

The Cassaform 30t Prop has a safe axial capacity of 30 tonnes and is used extensively in the civil and building industries where a range of vertical, horizontal and raking applications are necessary, across large and small scale projects. For example, bridge and roof supports, slab back propping, facade retention, falsework & formwork or raking and needling applications.

Applications & features

  • Adjustable jack
  • Easy/fast onsite assembly
  • Holes in both flanges enables bracing and bolting in either direction.
  • Modular components are off the shelf and therefore reduce lead time
  • Wide range of components and accessories.